Zanussi Electric Commercial Induction 2 Zone Boiling Top 400mm
Electric Induction 400mm 2 Zone Boiling Top
6 mm thick glass ceramic cooking surface with 2 independently controlled 3.5 kW induction zones. Induction top surface with seamless transition between individual heating zones. Exterior panels in stainless steel with Scotch Brite finish. One piece pressed work top in 1.5 mm thick stainless steel. Right-angled side edges to allow flush fitting junction between units.
Zanussi Electric Induction 400mm 2 Zone Boiling Top
• 6mm glass ceramic cooking surface with 2 independently controlled induction zones with a power
of 3.5 kW per zone.
• Almost the entire surface of the ceramic plate can be used without “dead” spots.
• Indicating lamp for each zone located on control console.
• Induction plates endowed with overheating safety device.
• Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.
• Low heat dissipation to the kitchen.
• The smooth, glass-ceramic plate is not directly heated, so there is no burning on the cooking surface.
• IPX 4 water protection.
• Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
• All exterior panels in Stainless Steel with Scotch Brite finishing.
• One piece pressed 1.5 mm work top in Stainless steel.
• Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
|Dimensions||400 × 700 × 250 mm|