Zanussi Electric Commercial InductionWok – HP 400mm
Electric Induction 400mm Wok – HP
6 mm thick glass ceramic Wok bowl with 5 kW surface power. Exterior panels in stainless steel with Scotch Brite finish. One piece pressed work top in 1.5 mm thick stainless steel. Right-angled side edges to allow flush-fitting junction between units
Zanussi Electric Induction 400mm Wok - HP
• 6mm glass-ceramic cooking surface with a total power of 5 kW.
• Indicating lamp for operating zone located on control console.
• Induction plate endowed with overheating safety device.
• Power to the zone can be set with progressive output i.e. fine regulation at the lower levels and largerprogress at the upper levels.
• Low heat dissipation to the kitchen.
• The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
• Automatic pan detection to transfer power only when pan is present.
• IPX 4 water protection.
• Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
• All exterior panels in Stainless Steel with Scotch Brite finishing.
• One piece pressed 1.5 mm work top in Stainless steel.
• Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps
|Dimensions||400 × 700 × 250 mm|