1800 979 769

Commercial Kitchen Gas Appliance Installation Guide

Gas Appliance Installation – Meet Regulations & Do It Right

To have a safe commercial kitchen of any size, be it a cafe with one oven or a restaurant with 20. You should be aware of some of the requirements that ensure your premises are safe so you don’t get fined or worse shut down. Although installation of gas appliances MUST be performed by a qualified gas fitter plumber, there are some things you should be aware of to continue their safe operation after they are installed. 

Energy Safe Victoria have released this informative video linked below that explains some of the Australian requirements in a clear easy to visualise manner that we highly recommend any chef or restaurant owner should watch. It’s not winning a Logie but it will give you some important knowledge that will likely be used once you are aware of it.

Click here to visit the ESV website for more information on commercial gas equipment installation

Click here or the full list of technical sheets for gas installation from Energy Safe Victoria. 

A few quick easy things you can check yourself and should be aware of if any change to the kitchen setup is made.

  • All gas appliances must have a bumper on the rear to prevent the appliance from crushing hoses or damaging connections. The bumper must extend beyond the farthest  connection point of the cooking appliance.
  • Gas hoses must be wall mounted & have a minimum floor clearance of 50mm in the hose loop to prevent the hose being rolled-on by the appliance when performing general maintainance and cleaning.
  • For appliances over 20kg, a secure restraint must be fitted that is shorter than the connected gas pipe to prevent the accidental disconnection or breakage of live gas lines.

Commercial Kitchen Gas Installation

Commercial Kitchen Equipment Melbourne-Adelaide-Brisbane-Perth-Sydney

Professional Catering Equipment

At Kitchen Setup we are proud to have the ability to give our customers not just the cheapest prices in Melbourne but honest professional service on every commercial fridge or kitchen appliance we supply. We understand the problems and ongoing costs that can occur when you’re unwittingly sold poor quality commercial refrigeration or catering equipment. We only supply equipment from select brands we are proud to have in our range. They all represent great quality and value for money and have outstanding warranties. This not only gives you the best commercial appliances but we get the best margins from our trusted manufacturers so can pass bigger savings on to our clients. Our range of commercial appliances from global leaders is specifically chosen to be best in its class and will meet a range of price-points from the most affordable budget-conscience to the most premium commercial appliances, either way you’ll get a truly professional setup you can rely on. Get the cheapest prices in Australia on all our commercial equipment without hassle, just ask us for a price.

Unadvertised Discounts On Every Commercial Fridge & Cooking Appliance

We can only advertise sale prices on select commercial catering appliances each month, but ask us for a quote on anything on our website and we’ll get you the best discount available upfront. You’ll have less hassles trying to find other lower prices and you’ll still save more. It’s our job to make sure our customers setup costs come first and ensure they get the best value commercial refrigeration & catering equipment for their restaurant, cafe, supermarket, pub or nightclub at the lowest price.

Keep reading, we just keep getting better.

If on the odd occasion we don’t supply the specific catering equipment you require, with professional interior designers in our team we can source the commercial appliance needed from other manufacturers or suppliers often for less than you could dealing alone. To save you even more we can affordably design and supply everything needed for your front-of-house setup. Basic floor plans or photo realistic 3D renders for accurate construction. Commercial use hospitality tables, chairs, flooring, lighting or ventilation. We have trusted manufacturers and suppliers in a wide range of interior design hospitality industries that we can supply or recommend at no extra cost. If you’re in Melbourne give us a call and we’ll pop out to discuss your options and will endeavour to make your day!

Choosing The Best Commercial Kitchen Shelving & Benches

Choosing The Best Commercial Kitchen Shelving & Benches

Stainless Commercial Kitchen Benches

Although it’s fairly straight forward to decide on how long or how wide a workbench should be based on the size of the kitchen. There are other factors that you may not have considered or be aware of.  Although many stainless steel workbenches look the same, they do have unseen variations that seriously impact their performance and the chefs happiness. Commercial kitchen workbenches should not be chosen because they simply look like the one you used previously. To withstand the demands of constant use and to give the bench a solid feel when prepping a second under sheet of a cheaper metal (usually zinc) must be used for dampening. Although it’s ok for sinks, you should never buy a work bench manufactured with just a single single sheet of stainless steel. The thickness of the dampen layer varies between manufacturers and something you should know before buying.  When it comes to dampening, the thicker and heavier the better. While 1mm-1.5mm dampening layers are common they should be widely avoided, not so much for lack of longevity but because their lack of weight does little to improve performance and gives the chef little feed back, creates more noise and is more likely to warp or form depressions. Look for (zinculume) dampening layers over 2mm think at absolute minimum.  3mm – 3.5mm dampening  layers will be the best you are likely to find prefabricated and they give the best long term performance. Chefs may not realise what they have until they don’t. They may not appreciate a heavily dampened bench until they work in a kitchen without it, the difference can be job changing. Check out our range of quality commercial kitchen benches here.

Stainless Commercial Kitchen Shelving

Shelving is another one of those things that may seem needs little thought. There are a couple of things you should know to get it perfect. Wall, bench mount or under-bench shelving is a necessity to store pots & pans and commonly used items that need to be close at hand. Shelving typically comes in two types. Flat S/S sheet and rolled / pipe shelving. They do serve very different purposes other than looks. A flat shelf should never be used in wet areas and used with much consideration if placed close above cooking surfaces. Any water caused by splashing and cooking vapours will pool under stored products and build up under the shelf itself. It will become a harbour for bacteria and pests. Always use a pipe shelf in wet areas, for both wall and under bench applications. They don’t allow water to pool so are much more hygienic and it’s easy to the clean if products don’t need to be constantly removed to dry them or the shelving.

Flat shelving is better suited for storing ingredients and small items but should only be used in dry prep areas or where there is little chance of water and grease build up that will affect hygiene. Stainless wall shelving should be thick, ridged and easy to clean. Look for at least 1mm thick and if over 1200mm wide ensure they have enough supports to suit it’s width (not just at the ends).

As a final point, on any stainless steel commercial workbench or shelf you consider, ensure that all cut edges are machine turned for safety. The damaged caused by the sharp edge of stainless steel will be unfortunately found when quickly cleaning and will end a chefs night even quicker. You can check out our full range of affordable ready to ship shelving here.

If you need help choosing what’s the best shelving or bench for your commercial kitchen, restaurant or cafe get in touch we’re here to help. If you’re in Melbourne we can even pop out to see you. We only supply quality shelves and benches that represent the best value for money. All have the best features and have options for flat or pipe under shelves. Available in a range of widths from 600mm to 2400mm.

Hope you learned something new.

Check Here For information Commercial Kitchen Standards – Standard 3.2.3 Food Premises and Equipment (Australia only)

Pt II – Choosing A Location

Commercial Kitchen Setup – Find The Location

There can be some mental hurdles to jump when trying to decide on the “perfect” location. Setting up a restaurant or cafe in area with minimal competition can be a great way to offer a new option to people with little choice. We all know a neglected suburban shopping strip that has been given a new lease thanks to some industrious little cafe that simply gave the community an opportunity to buy good coffee and they end up being the place to be. Or should you be in an area with an established customer base but are worried with so much competition if will you be able to effectively compete.

If you are looking in an area with similar establishments around, having a variety of cafes and restaurants in relatively close vicinity can help create a welcoming community environment. People will meet up to spend time in vibrant streets so your neighbours should not be seen so much as competition but as a choice for customers that helps brings them in. When designing your menu for an area like this having a particular niche in the food or service you offer is a great way to ensure the customer has a real choice and a reason to visit you. When you think of community strips like Richmond’s Victoria Street, or Carton’s Lygon Street, they have dozens of  similar restaurants within a very short distance, many with their own speciality. It’s the sense of community that becomes the attraction and brings in people far and wide allowing the entire strip to prosper. So keep your options open, try to see the advantages and disadvantages of each location and weigh them up against the type of place you envisage yours to be.

When searching you will undoubtedly look at numerous locations to find the ideal fit. At each place check what services are already connected and suitable for your requirements. Drainage, grease traps, exhaust hoods, main line natural gas and 3 phase power are some common requirements of a commercial kitchen. It can save you a lot of money on startup if you don’t need to install them yourself.

When inspecting an existing kitchen, the condition of the walls and ceilings could help indicate how adequate the ventilation was for the previous tenants. Closely inspect the walls and ceilings for any sign of moisture damage. It’s likely the premises will have been cleaned prior to your inspection but peeled paint or a greasy, sticky feel on on painted ceilings and walls can be difficult to remove so could be telltale signs the ventilation was not up to scratch and you may need to have canopies upgraded. Note down the length of any existing canopies. All large cooking appliances need to be fully under the canopy with overhang. Sometimes canopies can be modified to be extended but doing so will decrease air draw so if it is a consideration, you should seek advice from a professional canopy installer. Also keep in mind in Australia many upright hood style dishwashers need to be under a canopy to remove the steam they generate. As your wash up zone will be likely be away from the cooking zone a separate canopy may be needed. This can be over come by using a washer with a heat recovery system, they are more expensive but  you save money on installing a hood and gives you the option to easily relocate if you ever move.

Most commercial equipment is bigger and heavier than domestic models so it’s important check access for equipment. Doorways to access the kitchen should ideally be a 900mm and have enough room around them to negotiate long appliances like under bench cooling. Hopefully you have your concept menu done so you know what equipment is needed. If things look tight, confirm sizing and be sure there is an option that will be suitable to fit. There are some great compact units available that can fit practically anywhere. Ensure the appliance you need can be used with the connected services. If any of your required services are not yet installed check with the building owner to make sure they can be. Including extending or adding ventilation ducts if needed. Also confirm there is suitable rear access for deliveries and adequate area for waste disposal away from any food preparation or food storage area.


Our next blog on tips about helping making sure you meet regulations for the construction and fit out of food premises

Part III – If this is your first setup and you are doing it largely on your own, national and council regulations regarding the construction and fit out of food premises will be something you soon learn all about. Don’t fear council regulations or inspectors, they are a valuable resource in ensuring the safety of both staff and customers. They are more interested in making sure you are setup and can do things correctly than they are at fining you when you’re not. Apart from the required inspections, consult with council regularly. If you have any concerns don’t ignore it and hope for the best at inspection time. Bring it up with them to understand a solution. It lets them know you are serious about doing the right thing and you will better understand your requirements…

Pt I – Design The Menu – Know Your Needs.

Commercial Kitchen Setup – Design The Concept Menu

Obviously getting any business setup takes time, planning, money, and lots of hard work. Knowing what you plan to serve and the type of establishment you envisage will be the driving force to establishing how much needs to be spent in each aspect. If it’s your first time setting up your own establishment, let’s start by saying it will be an exciting and daunting experience. There are ways you can take some of the stress out of it and give you the confidence you are on the right track. We’ve got some tips for you to consider at the very beginning that we hope may help put some of your concerns to rest, after all, you’re not the first one to start your dream.

In order to know what equipment and space are needed, start by working out your menu. It’s a good idea to have a structured list done in a spreadsheet of all the of food you will be serving. From coffee to the turducken. Thinking of all the little things now may seem like a time-consuming process but it will help you clarify a budget and ensure you have enough of the right equipment and enough space to do what you envisage. For example, if you serve coffee you need to consider not just the space for a machine and grinder but all the requirements that go with serving coffee. How much of and where to store milk, coffee beans, ceramic cups, paper cups, sugar, napkins. You can make use of minimal space by putting some store items on display as is often the case with coffee beans. But it’s unlikely you would want your entire inventory of takeaway cups on show in the service area so you need to plan on having space to store them. Think about how many you want up front for a day or two of service and how much space you need to store a week, 2 weeks, 3 weeks  a months worth. This will also help working out the right place when you start looking, not too small that you can’t fit the stuff at your minimum requirements.

Break down the process for all the items on your concept menu for both back and front-of-house when appropriate. Write down every item you will sell, if cooking from fresh ingredients, break down the ingredients with an estimate of how much will be needed. It’s a good idea to note how important each item you list is. You may find one or two items on the menu that need an appliance that would otherwise be rarely used or takes up a lot of space so could it be removed or substituted if space is short?

… A short time later

Now you have a detailed list of all the items that need storage e.g. fridge or freezer. And equipment needed to prepare it e.g grill or fryer. In a spreadsheet, you can adjust quantities based on estimated demand and create a chart to easily visualise the percentage of space each item will take up and what equipment is getting used. If you get this list done at the very start you’ll be able to adjust quantities see how to scale your equipment needs when looking at different premises so you can take some of the guesswork out and undoubtedly prevent a plethora of unexpected issues. Don’t forget you always need to include items needed for cleaning and their safe storage.


Our next blog on tips about things to consider to help find the best location.

Trying to decide on the “perfect” location? Setting up a restaurant or cafe in area with minimal competition can be a great way to offer a new option to people with little choice. We all know a…